Coolquest, Inc.	Home	Products	Support	About	Contact
C++BOLD Example Parts Library

$INSERT
// THIS FILE IS IN THE PUBLIC DOMAIN.
// IT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
// NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 
$END
 
// part file for Agilent HFBR series
 
// Agilent Gigabit Ethernet fiber optic transceiver
 
$PART_NAME HFBR_53A5V
$JEDEC_TYPE FOXCVR_1X9      // 1x9 fiber optic transceiver package with duplex SC connector
$REF_PREFIX U
$PIN_COUNT 11               // nine signal pins plus two mounting pins
$PORTS
 
  VEER     1 ;
  RD_P     2 ;
  RD_N     3 ;
  SD       4 ;
  VCCR     5 ;
  VCCT     6 ;
  TD_N     7 ;
  TD_P     8 ;
  VEET     9 ; 
  NIC[2]  10 11 ;     // no internal connection, mounting pins
 
$ENDPORTS
$ENDPART
 
 
$PART_NAME HFBR_772B        // parallel fiber optic transmitter
$JEDEC_TYPE HFBR_772        // 100-pin BGA connector plus mounting and alignment holes
$REF_PREFIX U
$PIN_COUNT 100              // 1-10 / A-J grid
$PORTS
 
  DIN_P[0:11]   G7  F6  E5  G4  F3  E2  D4  C3  B2  B6  C7  D8;
  DIN_N[0:11]   G8  F7  E6  G5  F4  E3  D5  C4  B3  B5  C6  D7;
 
  TX_EN     I9;
  TX_DIS    H9;
  RESET_N   I8;
  FAULT_N   H8;
 
 
 
  VCCT[8]   H3  I3  H4  I4  H5  I5  H6  I6;        // supply voltage after power supply filter --> lower than spec'd VCC
 
  GND[34]       B1  C1  D1  E1  F1  G1             // "VEE"
            A2      C2  D2      F2  G2
            A3          D3          G3
                B4          E4
            A5      C5          F5
            A6          D6          G6
                B7          E7
                B8  C8      E8  F8
                B9  C9  D9  E9  F9  G9;
 
 
  DNC[30]   J1  J2  J3  J4  J5  J6  J7  J8  J9 J10
           A10 B10 C10 D10 E10 F10 G10 H10 I10
            A1  A4  A7  A8  A9
            I1  H1
            I2  H2
            I7  H7;
 
$ENDPORTS
$ENDPART
 
 
 
 
$PART_NAME HFBR_782B        // parallel fiber optic receiver
$JEDEC_TYPE HFBR_782        // 100-pin BGA connector plus mounting and alignment holes
$REF_PREFIX U
$PIN_COUNT 100              // 1-10 / A-J grid
$PORTS
 
  DOUT_N[0:11]   G7  F6  E5  G4  F3  E2  D4  C3  B2  B6  C7  D8;
  DOUT_P[0:11]   G8  F7  E6  G5  F4  E3  D5  C4  B3  B5  C6  D7;
 
  RX_EN     I9;
  EN_SD     H9;
  SD        H7;
  SQ_EN    J10;
 
 
 
  VCCR[8]   H3  I3  H4  I4  H5  I5  H6  I6;        // supply voltage after power supply filter --> lower than spec'd VCC
  VPP[3:0]  J1  J2  J8  J9;                        // terminator supply voltage for MSA compatibility -- not used by Agilent device
 
  GND[34]       B1  C1  D1  E1  F1  G1             // "VEE"
            A2      C2  D2      F2  G2
            A3          D3          G3
                B4          E4
            A5      C5          F5
            A6          D6          G6
                B7          E7
                B8  C8      E8  F8
                B9  C9  D9  E9  F9  G9;
 
 
  DNC[26]           J3  J4  J5  J6  J7
           A10 B10 C10 D10 E10 F10 G10 H10 I10
            A1  A4  A7  A8  A9
            I1  H1
            I2  H2
            I7
            I8  H8;
 
$ENDPORTS
$ENDPART